A Proven Dynavector Design for Serious Vinyl Systems
The DV-XX2 MkII sits well above entry-level moving-coil cartridges, using a 6mm solid-boron cantilever and Pathfinder line-contact stylus to trace fine groove information. Dynavector’s flux-damper arrangement and Alnico-5 magnet are paired with PCOCC copper coil wire, producing a low 0.28mV output for use with a suitable moving-coil phono stage.
Its threaded body makes mounting more straightforward because the fixing bolts screw directly into the cartridge. Careful alignment, tracking-force adjustment and phono-stage matching remain essential to obtain the performance this cartridge is capable of delivering.
System Matching and Setup
The recommended tracking-force range is 1.8–2.2g, with 2.0g providing a sensible starting point before final adjustment. Dynavector specifies a load impedance of 30 ohms or greater. An adjustable low-output moving-coil phono stage is therefore preferable, allowing the loading and gain to be matched properly to the wider system.
With an 8.9g body and moderate compliance, the DV-XX2 MkII suits many medium-mass tonearms. Cartridge and arm compatibility should still be checked before installation, particularly with unusually light or heavy tonearms.
Condition and Check
Mint condition, boxed and with fewer than 100 hours of use. The cartridge has been checked by Andrew. As with any precision cartridge, careful handling and professional installation are recommended.
Why Buy From Us?
- Over 40 years of experience: an established family hi-fi dealer with extensive knowledge of second-hand audio equipment.
- Checked by Andrew: the supplied condition and usage details are clearly stated.
- Three-month guarantee: dealer-backed reassurance with your purchase.
- Clear descriptions: more information and support than an unverified eBay-style marketplace listing.
- Careful packing: secure preparation suited to a delicate cartridge.
- After-sales support: help is available by phone or email with installation and system-matching questions.
Dynavector DV-XX2 MkII Specifications
- Type: low-output moving-coil cartridge
- Output voltage: 0.28mV at 1kHz, 5cm/s
- Frequency response: 20Hz–20kHz, ±1dB
- Channel separation: 30dB at 1kHz
- Channel balance: 1.0dB at 1kHz
- Internal impedance: 6 ohms
- Recommended load impedance: 30 ohms or greater
- Stylus: Pathfinder line-contact, 7 × 30 microns
- Cantilever: 6mm solid boron
- Compliance: 10 × 10⁻⁶ cm/dyne
- Recommended tracking force: 1.8–2.2g
- Weight: 8.9g
